Double Liquid Potting Machine DLP-400A

Gear pump for metering, screw pump is optional.

Material loading by vacuum pump.

Material agitating and deforming by vacuum pump.

Metering ratio is adjustable.

Metering accuracy :t3%.

Dynamic mixing head.

PLC and touch screen control.

Full English interface.

Double liquid vacuum potting Machine DLP-400A Sturcture:

1. Machine consist of: material feeding system s second metering system , control system.3 axis potting system. loading

system;

2. Tank A is equipped with umbrella defoaming device.

3. Potting valve cleaning and anti-curing function.

1, Tank A adopt umbrella defoaming system,tank A is 25L,tank B is 10L ,material can be fed without stopping machine.

2. Tank A/B are equipped with liquid level detecting sensor.

3. Vacuum pump is adopted for defoaming and material loading.

4. Equipped with cleaning tank to clean the potting head.

The umbrella defoaming device is mainly used to mix the glue well and defoam well. The principle is that the glue stream is continuously drawn from the bottom to the top umbrella piece by the screw rod and dispersed around it. It is beneficial to remove bubbles effectively (especially to the high

viscocity glue) and to stir more evenly when vacuum pump is vacuumed.

The main characteristics are as follows: pump up the bottom glue to avoid glue sedimentation;

. The secondary metering is to use the second set of screw pumps to

control the accurate output of the glue produced by the primary metering

pump according to the set glue quantity.

. The principle of the accuracy is guaranteed: the secondary metering

pump is installed near the mixing valve, Avoid the pressure and resistance

caused by too long pipeline to affect the stability of the glue supply, the glue

output of the glue supply pump through the secondary quantitative output to

ensure customer requirements (accuracy can be less than t3%);

. The metering pump is equipped with pump pressure sensor, so as to

ensure the stability of glue injection, signal output alarm when pressure is not

enough or ultra high pressure, and on line real-time monitoring to avoid the

mismatch caused by various factors in production process.

. Equipped with dynamic mixing head which is equipped with detect sensor

to check rotating status to avoid ununiforming mixing.

·X/Y/Z 3 axis potting system, machine travel: X:300mm/Y:300mm/Z:60mm, positioning accuracy :0.05mm;

. Product enter potting area, then dispensing valve move to dispense material.

. Equipped with safety light curtain at the product entrance.

SMTs Cosmetics Line, LED Tubelight 4Head Still Body Pick And Place Machine, Pick And Place Machine LED, SMT Pick And Place Machine Yamaha, Desktop SMT Pick And Place Machine, Pick And Place Machine Main Board, Cheap Pick And Place Machine, Shenzhen PCB Machine Shearing Cutting, 12 Volts Charder Auto Cut Off PCB, PCB Routing Mashine, Routing PCB Machine, PCB Depanneling Routing Bit, Router CNC PCB, PCB Router SPIndle, Mini PCB CNC Drill Router, PCB Manual Router