The PCBs, movement left to right or vice versa is controlled by the X & Y Axis, and to move the drop jet fluxer, and the solder pot up and down for height calibration by the Z axis. The PCB size that can be used on this machine are; for smaller size 50 x 50 mm, Max 350 x 260mm. If you have a board with Max700 x 260 mm, you can also solder it by doing 1 half per time.

• Contains every basic feature used to set up the machine before starting production
• Industrial PC control; Use friendly software Windows 10 software. With board scanner of picture or Gerber file, just draw “dot” or “line” on it to set Up the fluxing and the solder path
• including Auto Home, Sensor and Axis Status, Auto Wave Height Calibration, Auto Solder Fill-up, and Navigation for position calibration.
• Trace-ability software. The PCB program all information will be recorded not only temperature/path, But also solder nozzle type, flux name, solder name etc. The user will get total repeatability of soldering quality.

• Standard equipped with inline "N2" heating system.
• All motion is by servo motor & servo driver.
• Fully equipped with drop jet flux nozzle, bottom preheater, selective pot, live-on camera, auto wave height calibration.
• Totally parameters control & monitoring software. This machine besides containing every basic features like temperature/motion path & speed, it also do the monitoring of the machine’s air pressure, N2 pressure & flow, N2 purity etc factors which may influence soldering quality.
• Different diameter of soldering nozzle are available, customized nozzle are available too