SMT Reflow Oven – 10 / 12 Zones
From: Author:SMT Reflow Oven Publish time:2021-09-14 12:02 Clicks:0
SMT Reflow Oven – 10 / 12 Zones
Basic Description
High production capacity, the normal production chain speed up to 1500mm/min, low energy consumption, new thermal engineering management system, effective reduction of cost, professional corresponding high precision production and high precision PCB process.
This type is our best SMT reflow oven, which ensures the ability of high temperature control, and you could found the setting temperature and actual temperature difference within + 1℃.
Super fast heating capacity, the difference of adjacent temperature difference is less than 100 degrees.
The latest insulation technology plus a new furnace design ensures that the furnace temperature zone can make the nitrogen concentration range 50 – 200 PPM (option).
Feature
1. Central Support System (Option)
- Ensure a stable and precision control of conveyor movement as well as preventing the PCB deformation, enable to support the guide rail to maximally meet different requirements of soldering production.
2. Nitrogen System (Option)
- Improving higher soldering quality by the way of decreasing the oxidation during the process, it can also solve the issues such as solder balls, solder bridge and accelerate wetting speed.
3. Dual Rail System (Option)
- Dual-rail production is optional, expanding double times of production capacity with the expenditure of one machine, which save the SMT line footprint and other operating costs.
4. Patented Micro-circulation System
- Micro-circulation system ensure average temperature in the furnace and can effectively reduce influence of temperature field on the welding spot.
- It has a good performance of same direction and different properties. It effectively solves the problems of unevenly distributed air of traditional filter network. As a result, it can prevent occurrence of non-heated area and shadow resulting reflection.
5. Cooling Technology
- The latest cooling technology can be cooled by two sides. The maximum cooling length is 1100mm, which ensures fast cooling and minimum outlet temperature.
Specification
| Model | ||
|---|---|---|
| Heating Zone System | ||
| Number of Heating Zone | Top12/Bottom12 | Top10/Bottom10 |
| Length of Heating Zone | 4560mm | 3860mm |
| Number of Cooling Zone | Top2/Bottom2 | Top2/Bottom2 |
| Exhaust Volume | 11M3/minX2 | 11M3/minX2 |
| Warming Time | Approx. 20min | Approx. 20min |
| Conveying System | ||
| Maximum Width of PCB | 50-500mm | 50-500mm |
| Rail Width Range | 50-400mm | 50-400mm |
| PCB Component Height | Top30/Bottom25mm | Top30/Bottom25mm |
| PCB Transmission Agent | Chain+Mesh | Chain+Mesh |
| Conveying Speed | 0-2000mm/min | 0-2000mm/min |
| Conveying Height | 900+/-20mm | 900+/-20mm |
| Conveying Direction | L to R/R to L | L to R/R to L |
| Conveyor Rail Fixed | Front rail fixed(option: rear rial fixed) | Front rail fixed(option: rear rial fixed) |
| Control System | ||
| Temp-Control Mode | PID Full-closed loop control + SSR Driver | PID Full-closed loop control + SSR Driver |
| Temp-Control Range | Indoor Temp-320 Celsius degree | Indoor Temp-320 Celsius degree |
| Temp-Control Accuracy | +/- 1 Celsius degree | +/- 1 Celsius degree |
| PCB Temp-Deviation | +/- 2 Celsius degree | +/- 2 Celsius degree |
| Cooling Mode | Forced wind cooling (chiller cooling optional) | Forced wind cooling (chiller cooling optional) |
| Power System | ||
| Initial Power | 62KW | 56KW |
| Run Power | 12KW | 10KW |
| Power Requirement | 3Phase 380V 50/60HZ | 3Phase 380V 50/60HZ |
| Abnormal Alarm | Extra-high temp or extra-low temp alarm | Extra-high temp or extra-low temp alarm |
| Signal Tower | Three light | Three light |
| Option | ||
| Nitrogen System | Nitrogen gas machine, machine type plus N, standard for nitrogen seal structure and pipeline, nitrogen flow meter, chiller | Optional |
| Central Support | With central support, no net | Optional |
| Dual Rail Transport | Dual-rail model, plus D, standard for 1, 4 fixed and 2, 3 for active; PCB width is unilateral 250mm |
I.C.T is a manufacturer of SMT machines. It mainly provides customers with SMT production lines including SMT Stencil Printers, Pick and place machines, Reflow Oven, AOI Machine, Wave Soldering Machine and PCB Handling Machine etc. I.C.T has more than 25 researches on SMT and DIP technology, for the world Customers provide SMT total solutions. There are successful cases of SMT technical team in Asia, Europe, America, Africa, and Australia.
I.C.T provide SMT solutions at various stages according to the different needs of customers. I.C.T is not only a provider of SMT equipment and technology, but also is the customer's escort in the field of SMT and DIP.
Welcome more people to discuss with us about SMT technologies and solutions, please contact us for more information:
Tel: +86 13670124230 (WhatsApp/Skype/WeChat)
Email: etasmt@foxmail.com
Keywords：
SMT PCB Production Line Machine, LED Manufacturing SMT Machine Line, Desktop Stencil Printer, Stencil Printer Manual, Reflow Oven Heating Element, Reflow Oven Soldering, Wave Soldering Machine Mini AutomatIC, PICk And Place Component, PanasonIC PICk And Place, Samnug PICk And Place, SemiautomatICo PICk And Place, PICk And Place Ki, PICk And Place Altium, Taponador PICk And Place, PICk And Place Parts, Plug PICk And Place, CNC PICk And Place, 0201 PICk And Place, PICk And Place Quad, Foam PICk And Place, SMT PCB Magazine Loader, PCB Loader And Unloader, PCB Unloader Loader For Scrubber, PCB Magazine Unloader, 3018 Laser Engraver Router PCB Milling Machine Pro