• Home
  • AboutUs
  • News
  • Products
  • Projects
  • Service
  • Cooperation
  • ContactUs
SMT Pick and Place Machine
  • Home
  • AboutUs
    • CompanyPresidential SpeechHistoryCorporate CultureOrganization
  • News
    • TechnologyNews
  • Products
    • SMT LineSMT Assembly LineSMT Production LinePCB Assembly LineSMT Solutions
  • Projects
    • LED LightsLED TVSMT OEMSecurity IndustrySmart Phone5G Products
  • Service
    • After ServiceService ModeService Content
  • Cooperation
    • PartnersAgent
  • ContactUs

News

Technology
News

Maintenance of the reflow soldering oven

From:    Author:reflow soldering oven    Publish time:2021-09-14 15:49    Clicks:0

In order to prolong the service life of reflow soldering, ensure the stable production of SMT, improve the output and ensure the product quality, every part of reflow soldering needs to be maintained very carefully.

①Track parallelism:

Measure the distance with vernier caliper. Adjustment method: take the width of the inlet as the reference point.

If the outlet is wide or narrow, using the fixed pliers and 19mm open-ended wrench to separate and loosen the chain and the rear end rotating gear bar of the track, and then turning the front and rear end transmission gear bar by hand to adjust to the same distance as the front and middle end.

②Track moving device:

If the track moving device fails to slide smoothly, it is necessary to manually adjust the track width to the limit and walk back and forth in the temperature range, and observe whether the track width is affected by the main force. If it is too tight, loosen the mobile device.

③Front and rear iron and steel plates of the fixed side of the track:

In addition to checking whether the iron and steel plates are offset with a level gauge, it is also necessary to check whether the fixing screws of the track are loose with a hexagon wrench. Ensure that the position of steel plate before and after the fixed edge of the track is stable and correct.

④Gear chains of track width adjustment drive motor:

It is necessary to check whether the gears and chains rotate normally, and the fixing screws of the axle center cannot be loosened, and keep their surfaces clean at all times, and then lubricate the gears and chains with lubricating oil.

⑤To adjust the width of the transmission rod:

The transmission rod needs to rotate normally, without dirt, deviation, bending or deformation. The rod surface must be kept clean and lubricated.

⑥Front end and middle fixed gear bar and gear:

They must be engaged normally, and there shall be no dirt, deviation, bending and other deformation.

⑦Middle fixed gear bar assembly:

It must move synchronously with the transmission motor, and travel smoothly. Remember to use a hex wrench to tighten the screws before checking the engagement.

 

Keywords:

SMT Line Memory Manufacture, Shenzhen SMT Production Line, PCB Solder Paste Stencil Printer, Large-Size Plane Screen Printer PCB Stencil, Benchtop Hotair Solder Paste Reflow Oven, Conveyer Reflow Oven, SMT Wave Soldering, SMT Wave Machine, SMD Thd PICk And Place Machine, Big Component PICk And Place Machine, PICk And Place Place, Place And PICk, PICk And Place Usate, PICk And Place Gripper, Fuji PICk And Place, SMT PCB Loader Equipment, SMT PCB Loader Unloader, PCB Loader Unloader SMT, Unloader Machine SMT, SMT Line AutomatIC PCB Shuttle Conveyor, RobotIC Soldering, Soldering Iron Robot, Soldering Robot Machine, Three Axis Soldering Robot

 

I.C.T is a manufacturer of SMT machines. It mainly provides customers with SMT production lines including SMT Stencil Printers,  Pick and place machines, Reflow Oven, AOI Machine, Wave Soldering Machine and PCB Handling Machine etc. I.C.T has more than 25 researches on SMT and DIP technology,  for the world Customers provide SMT total solutions. There are successful cases of SMT technical team in Asia, Europe, America, Africa, and Australia.

I.C.T provide SMT solutions at various stages according to the different needs of customers. I.C.T is not only a provider of SMT equipment and technology, but also is the customer's escort in the field of SMT and DIP.

Welcome more people to discuss with us about SMT technologies and solutions, please contact us for more information:

Tel: +86 13670124230 (WhatsApp/Skype/WeChat)

Email: etasmt@foxmail.com

[Comments:0/Comment] [Bookmark] [Big Medium Small] [Print] [Close]
MoreNews Comment
Quick Comment
TITLE:
NAME
CONTENT
(*)

Related Comment
AboutUs
Company
Presidential Speech
History
Corporate Culture
Organization
News
Technology
News
Products
SMT Line
SMT Assembly Line
SMT Production Line
PCB Assembly Line
SMT Solutions
Projects
LED Lights
LED TV
SMT OEM
Security Industry
Smart Phone
5G Products
Service
After Service
Service Mode
Service Content
Copyright 2011 © SMT,Pick and Place Machine,SMT Assembly Line,SMT Machine,SMT Stencil Printer,SMT Reflow Oven,SMT Total Solution |CMSADMIN

Wave Soldering MachineFPC Feinforcement MachinePick and Place MachineSMT MachineYAMAHA Pick and Place MachineHanwha SMT MachineJUKI Pick and Place MachinePanasonic SMT MachineSMT Reflow OvenSMT Solution